Frequently Asked Questions

Decay in a tree is not always visible from an external inspection, as it progresses to the outer limbs from pith decay in the main trunk. Decay can progress slowly, if the tree is left in-situ in it's natural environment. Physical stresses to the tree (eg. Relocation/root damage) can accelerate the decay process.

Invasive tree roots can undermine foundations works and cause damage to structures including piped services.

Developmental sites often required land clearing for relevant construction. Disturbance to a root zone on a tree can lead to canopy die-back and tree decline. A risk of a tree falling can be caused by excavating/undermining the root system structure to a point which cannot compensate for the size of the tree and the wind sail of the canopy. Equipment strike upon bark, can lead to a penetration wound, which will invite tree decay and subsequent insect infestation.

Lightning and wind can cause damage to limbs and bark, which can subsequently lead to ingress of decay, and tree decline. When a tree's bark is penetrated or removed, this area can become an ingress point for insect or decay, particularly in soft fleshy trees such as Brachychiton rupestris.

By using a VTA (visual tree assessment) on mature trees, external damage and decay can be detected. The risk of falling limbs is increased when the decay in the outer limbs gets to a size that effects the structural integrity of the affected limb. The future effect of decay on limbs considered at risk, need to be monitored by a qualified Arborist within a predefined schedule, and preventative hazard reduction steps are to be taken as appropriate.

Most trees can be relocated, but size does matter. Very small specimens like Cycas are generally too delicate for the relocation process, whilst very large palms – including Cocos Palms, Cotton Palms, and CanaryIsland  Palms that have grown beyond a manageable scale – may exceed our equipment capabilities. If you’re unsure whether your tree falls within our size range, send us some photos and measurements and we’ll let you know.

Successful tree relocation depends heavily on preserving a healthy root ball. We typically need at least 1 to 2 metres of clearance around each plant to extract the root system safely. Trees planted too close to buildings, retaining walls, or other structures may not have sufficient root zone access for a successful move.

Most transplants require access for large machinery, including excavators and cranes. Before we can proceed, we’ll need to assess whether your site can accommodate this equipment. Underground services (water, gas, electrical) and overhead power lines can also create challenges during the extraction stage. This is why it’s essential to engage a professional specialist arborist – we ensure all safety requirements are met and risks are properly managed.

We’re proudly based in Toowoomba and prefer to work within a 3 to 4 hour radius of our home base in Withcott. This allows us to provide the hands-on, personalised service we’re known for. If you’re located outside Queensland, unfortunately we may not be able to assist – but feel free to reach out and we’ll do our best to point you in the right direction.